Modified TopsCNC from Germany 🇬🇧

@Kamil: May I too ask for the 3D-Model-File? I'm bad at imaging how the parts must be assembled. I think the model could help me avoid wrong assembly.

Thank you, Heinz

heinz.krueger@postheo.de

Du bist eingeladen

Hola @Kamil! creo ser el primer latino en escribir jajajaja y de verdad te agradezco por tu gran aporte. He comenzado a conocer el mundo CNC a través de mi TOPSCNC con nema 17, pero es muy grande y poco precisa (1600x1600mm) por lo que vi la actualización a Nema 23 de Topsie, luego vi tus mejoras y quedé aún más encantado. Estoy cotizando todas las partes e impresiones para actualizarla y reducir el tamaño a 1000x1000mm y ganar más estabilidad y precisión. Sólo tengo una duda, estoy pensando usar Filamento PLA 870 (mejores características en resistencia que el PLA tradicional) pero no sé cuánto relleno ocupar, recomiendas algún porcentaje en particular??

Desde ya te agradezco nuevamente, un gran abrazo desde Chile, de esta otra parte del mundo!

Pd: dejaré la traducción de google abajo

Hi @Kamil! I think I'm the first Latino to write hahahaha and I really thank you for your great contribution. I have started to know the CNC world through my TOPSCNC with nema 17, but it is very big and inaccurate (1600x1600mm) so I saw the update to Nema 23 of Topsie, then I saw your improvements and I was even more delighted. I am quoting all the parts and impressions to update it and reduce the size to 1000x1000mm and gain more stability and precision. I only have one question, I am thinking of using PLA 870 Filament (better resistance characteristics than traditional PLA) but I don't know how much filler to use, do you recommend a particular percentage?

From now on I thank you again, a big hug from Chile, from this other part of the world!

Hi Kamil, your work is impressive! Can I have access to your Fusion 360 files? My email is jfroux_1@hotmail.com. I’m planning to build a cnc like your.

@serg_gius

Actually, you can take anything. PLA is the easiest to print and the cheapest. I would recommend SPLA, but ABS works too. I do not know PLA 870. I have set the filament to 50%. To get more stability you can print the feet double and glue them together or screw it together. This is the only thing I would do, the rest is quite stable. But... my CNC is only 750 x 750mm

@Jean-François

check your mailbox

Hi Kamil, Would you mind sending me the files ? Thank you!  Gino.savard@gmail.com

@Gsavard

You have a Mail. 

@kamil thank you so much. I will try!

So, finally, the z axis is a T8 screw with 2 KP000, right? and, can you send the files to my email? please.  sergiogarcia1705@gmail.com 

Thanks again. Great job!

@serg_gius

Exactly!

You would only have to get the ball bearing out of the socket.

You have a Mail.

Thank you Kamil