@serg_gius
Actually, you can take anything. PLA is the easiest to print and the cheapest. I would recommend SPLA, but ABS works too. I do not know PLA 870. I have set the filament to 50%. To get more stability you can print the feet double and glue them together or screw it together. This is the only thing I would do, the rest is quite stable. But... my CNC is only 750 x 750mm
check your mailbox
Hi Kamil, Would you mind sending me the files ? Thank you! Gino.savard@gmail.com
@Gsavard
You have a Mail.
@kamil thank you so much. I will try!
So, finally, the z axis is a T8 screw with 2 KP000, right? and, can you send the files to my email? please. sergiogarcia1705@gmail.com
Thanks again. Great job!
Thank you Kamil
Can you tell me what you bought for the Z ? Is the carriage Model MGN7C/H ? or MGN9C/H ? or MGN12C/H?
https://createforcuriosity.com/en/forum/topic/1xqK9YMD?page=4
MGN12C The short ones.
Hi Kamil,
Could you add me ?
Thank you so much !
3dvdev(a)gmail.com
You are welcome.
