Modified TopsCNC from Germany 🇬🇧

Sorry,

I’m hungry... , i ate .de

jlruggeri@free.fr

@ nikoss43800

How should I send it to you? Give me your email address, then you get everything and can take what you need.

np3415@yahoo.fr

thank you 

Peux tu me rajouter egalement
khinyo@free.fr

Merci!

I invited you, you must have received an email.

Hello Kamil,

what kind of cables did you use?

Are the drag chains suitable?

Or is that not so important?

Where did you buy this?

Thanks Michael

Somewhere in the front of the post this has already been discussed. I have servo motors with integrated drivers. Therefore I can take network cable, because only data is transferred. They are shielded and flexible. But not the cables for wall mounting. The rest I have taken shielded flexible cables. So for the Z axis and power for the servos. I'll take a look at the link from Amazon. In the drag chain you can take all the cables that have fine wires, so not the ones for the wall mounting and... Shielded. Otherwise it can come to the step losses.

Edit: https://www.amazon.de/dp/B084RTWGWD/ref=cm_sw_r_cp_apa_glt_i_MFVECA4PSQ0K6D38QFWW?_encoding=UTF8&psc=1

Good Day Kamil, 

Creat project.  I am also building the Heavy.  I already done the X,Y-axis.  But need a stronger Z-Axis.  Could you please share your project with me? I am going to use a 1.5kw water cooled spindle. 

strauss dot dawie at gmail dot com

You are welcome

Если вы почитаете форум, то увидите, что есть несколько человек, которые сделали это на рельсах. А Топси работает над новым, более крупным станком. Но и намного дороже.

Вы получили письмо. И с этого момента вы должны писать на английском языке. Мой русский так плох...