Thank you @Kamil. Although to be honest, I did not receive an email and also checked spam. Are you sending an attachment or just shared from fusion direct?
Can you send it again? As for the spindle. I indeed designed and printed my own. It was very straight forward. Now I am thinking about dust collection. ;)
I share the complete Fusion 360 drawing. It is deposited on Box.com.
The drawing is made up of original parts from Topsie and parts from me for linear slide bearing, normal T8 screw and ball screw. Since it is made up of many files, you need to check that the part is really flat on the printer before printing. Otherwise it will print in the air....
What spindle do you have? If it's the same as mine, I found a nice extractor on the net.
https://www.ingostipps.de/.cm4all/uproc.php/0/Absaugung%20CNC%20IngosTipps.f3d?cdp=a&_=17714812d10
If the file has *.zip extension, you need to make it *.f3d.
I invited you again. If that does not work, send me another mail address.
Found it Kamil! Thank you! I had not been notified that it was in box but after logging in, it is there.
Would you mind sending the files again? Thanks! Karl_kani_30@hotmail.com
check your mailbox
Amazing job Kamil, i'm impressed :) keep going !
@Kamil: May I too ask for the 3D-Model-File? I'm bad at imaging how the parts must be assembled. I think the model could help me avoid wrong assembly.
Thank you, Heinz
heinz.krueger@postheo.de
Du bist eingeladen
Hola @Kamil! creo ser el primer latino en escribir jajajaja y de verdad te agradezco por tu gran aporte. He comenzado a conocer el mundo CNC a través de mi TOPSCNC con nema 17, pero es muy grande y poco precisa (1600x1600mm) por lo que vi la actualización a Nema 23 de Topsie, luego vi tus mejoras y quedé aún más encantado. Estoy cotizando todas las partes e impresiones para actualizarla y reducir el tamaño a 1000x1000mm y ganar más estabilidad y precisión. Sólo tengo una duda, estoy pensando usar Filamento PLA 870 (mejores características en resistencia que el PLA tradicional) pero no sé cuánto relleno ocupar, recomiendas algún porcentaje en particular??
Desde ya te agradezco nuevamente, un gran abrazo desde Chile, de esta otra parte del mundo!
Pd: dejaré la traducción de google abajo
Hi @Kamil! I think I'm the first Latino to write hahahaha and I really thank you for your great contribution. I have started to know the CNC world through my TOPSCNC with nema 17, but it is very big and inaccurate (1600x1600mm) so I saw the update to Nema 23 of Topsie, then I saw your improvements and I was even more delighted. I am quoting all the parts and impressions to update it and reduce the size to 1000x1000mm and gain more stability and precision. I only have one question, I am thinking of using PLA 870 Filament (better resistance characteristics than traditional PLA) but I don't know how much filler to use, do you recommend a particular percentage?
From now on I thank you again, a big hug from Chile, from this other part of the world!
Hi Kamil, your work is impressive! Can I have access to your Fusion 360 files? My email is jfroux_1@hotmail.com. I’m planning to build a cnc like your.
