thank you Kamil for your answer
Excuse me Kamil for bothering you again but for the SFU1204 screws is it this model?
https://fr.aliexpress.com/item/1005001335646337.html?spm=a2g0o.productlist.0.0.760d150dhTLRME&algo_pvid=b6db6b23-34dc-4e1a-aedd-ec8e660a2334&algo_expid=b6db6b23-34dc-4e1a-aedd-ec8e660a2334-5&btsid=0bb0624416103075289673352efb4b&ws_ab_test=searchweb0_0,searchweb201602_,searchweb201603_
And with the milling machine model you installed and the modifications. you don't have a bending problem on your x and y axis?
Thank you in advance.
a bending problem? What is that? What bends on your CNC? I can't answer your question because I don't know these problems.
The SFU1204 is standardized, but you have to watch out there are apparently two nut diameters, 22mm and 24mm. I got two 22's and one time 24.... Although the same seller.. Fortunately, the customization is not a problem. But you have to imagine my face when I noticed that when assembling. Oh, in my drawing is of course my size, you have to adjust.
So measure before you print!
Hallo Kamil,
Thanks a lot for this upgrade, and all your videos. This is a true improvement for the community.
Would you please be kind enough to add me to your Fusion360 project.
Here is my email: vilasapa(at)free.fr
Vielen danke
Send
thank you for your answer, I am a great beginner in the field for your project that you sent. the diameter and 24 or 22? for sfu screws.
Thanks Kamil !
I have X axis 23 (there are probably 22, 23, 24) and two 22 on the Y axis,
but adjusting the drawing takes 2min, so you don't need to pay attention to that. Have originally planned everything on 22mm. When assembling, I noticed that a ball nut is larger.
I am a beginner too...
Ok thanks you ;)
Thanks a lot for this upgrade, and all your videos.
Would you please be kind enough to add me to your Fusion360 project.
Almost done building the heavy cnc 23 nema, think i upgrade simular to yours... using now 4x Nema23with mach3 usb and.x-y axis TR12x8
Here is my email robert.oerlemans@hotmail.com
Are you using a washer for the z-axismotor?
Kind regards....
