Hello,
I want to build this CNC as a project and have two main questions at this point.
Is the BOM for the screws correct? Link to CNC Heavy Design page
If not does semoeone have an updated list of screws/nuts/washers I am going to need in order to build the CNC.
I have to order all of my screws on the internet and I would like to make as few orders as possible due to shipping cost.
This is what I ordered with my first order of screws Link to a List of screws I ordered
Is there a building plan on how the machine has to be assembled. I watched the video on topsies channel but there is no infromation given when to use which screws/nuts etc. Link to the video I am using as a reference
Quick example:
For the Part Y Axis Exterior Top Right
What screw is A? M5 screws are too big for the hole. I don't see any m4 screws which would fit the length. Further on in the video he adds nuts to these screws to attach them to the Interior part. In the List for screw there are only M6 nuts mentioned.
What nut is B? M6 nut is way to big. I am guessing these should be m5 nuts. These are not in the List of screws either.
@Snorky Thank you very much. This helped a lot. I ordered the all the parts in your description.
