@Amstel tu peux le partager sur un drive ?
@Snorky
En partant de 0 avec du PLA à 20 E le kg, du V slot, de la visserie de qualité et l'électronique, le budget que tu annonces est parfaitement dans les clous, je n'ai pas fait le compte exact mais je pense être au-dessus.
@Snorky
@RVL
I built my Heavy version (1 meter x 1 meter) "all in" for about $750 US- about $683 Euro. I used 4 kg of PLA+ filament.
@TSplain What were your 3D printer settings? A few persons said that they used 5-6 kg.
@TSplain : thanks
@Kohfe
They varied. I used Creality Slicer 1.2.3
The support pieces like the C Arm Supports, dust collection parts I printed layer height at 2.0 and 25% fill.
Same as for the X and Y Axis supports, drag chain supports / mounts.
All of the rigid parts like the Stepper Motor "legs" and gantry / Z Axis parts I printed at 1 layer height and 50% infill
25% of the way a friend of mine showed me how to get good results printing without platform adhesion or supports.
I also did not print the drag chain. I cheated and bought them from amazon.
@TSplain Thank you, I will try that.
My understanding, from scientific test results I have read, is that the number of outside layers is more important for strength than the infil percentage.
@TSplain "25% of the way a friend of mine showed me how to get good results printing without platform adhesion or supports."
What tips did your friend give you?
