Une CNC Heavy 23 de plus 🇫🇷

Hello FredDeLAin,

Thank you for the information. Would you please let me know what is the different between trapezoidal and SFU ball screw?

which one is better. Actually I don't mind to make it 1500 x 1200. I only need the X axis to be 1500mm as I make signage and the Acrylic or Aluminum sheets are coming in the size of 1220 x 2440mm. so the  width  for the working area should be at least 1220 mm.

Both are advantage and disadvantage :

https://clubtechnical.com/lead-screw and https://clubtechnical.com/recirculating-ball-screw

Mainly : ballscrew is more efficient but less robust in bad condition

Je planifie de mettre des capteurs fin de course. J'ai trouvé cette solution pour éviter les bruits : https://github.com/gnea/grbl/wiki/Wiring-Limit-Switches

(en video https://www.youtube.com/watch?v=u762U91ZO8I )

Est ce composant est dispo sur le marché ? (sinon je graverai le PCB quand la machine sera finie pour tester :-)))

Regardes le post de Peter Donovan ces modules existent tout fait sur Amazon donc normalement sur aebay et Ali

Marc

Hello FredDeLAin,

Thank you so much for the clear info. I use the CNC only for cutting 3mm - 30mm Acrylic or PVC to make signboard and 3d letters.

There is not much work and I think the trapezoidal should do my job. As you know the PVC or Acrylic sheets are coming in standard size of 1220 x 2440 mm.

So I need my working area to be at least 1250 mm width and the length about 1500mm.

Please let me know if I am right if I buy the items as the following :.

- X AXIS: Aluminum 2040 5pcs - Length: 1350 mm

Trapezoidal Screw = 1250 mm x 1 pcs -(Note: TrapezoidaT8 or T12 for nema 23?)

- Y AXIS: Aluminum 2040 4pcs - Length: 1500 mm

Trapezoidal Screw = 1400 mm x 2pcs - (Note:TrapezoidaT8 or T12 for nema 23?)

- Z AXIS: Trapezoidal Screw: 200mm x 1 pcs - (Note: The length is 200mm or bigerfor nema 23?

                                                                              And what about Trapezoida screw T8 or T12 for nema 23?)

Hope to hear from you soon, so I can place the order and buy these items.

have a great time and thank you in advance.

Because mine is not finished yet, I'm not sure of the exacte oversizing you need to reach 1250mm (but for sure your leadscrew must be more than 1250 because you have a bit losting area on each extremity). Probably topsie or other people, that already finished their machine, could confirm you better than me.

Thank you for your quick reply.

Wow

Thank you for this CNC build. Really excellent job.

I am having trouble printing the legs as they are slightly bigger then my 200x200 printer base. is there any way to fix this.

If I cut the motor mount in half and glue after printing, will this work. can maybe reinforce with motor washer at the back.

I am using T12 lead screws. Is there a T12 nut holder. The nut I have does not have a flange, so can the holder be split to incorporate the nut in the middle.

Thanks again

En attendant quelques pièces pour l’entraînement mécanique ... j'ai attaqué mon boitier de commande en recyclant un vieux boitier de PC et je me suis réimprimé une façade à la place du lecteur CD et des bouton d'origine. (Et câblage de l'arduino uno)

Je prépare le support pour mon ancienne Kress en broche 43mm en base. Débutant dans fusion360... C'est la 1ère fois que j'utilise des côtes paramétrables dans mes sketchs (c'est vraiment super pratique). Si le support donne satisfaction, je compèterai avec support d'aspiration et je partagerai pour ceux qui ont une machine ancienne génération de type KRESS, MAFELL, PROXXON,...