Its ALIVE! Thanks to Topsie for making this possible. Still got a lot of tuning checking to do before attempting first cut, but all axis moving as required. Presently using all NEMA 17's on all axis and UNO/Shield combination. Will cut over down the road to NEMA 23's along with Smoothstepper and different drivers to support the 4.2 amp NEMA23's. This so I can use Vectric Aspire/Vcarve and possibly MACH3 which I own from a previous DIY 4x8 CNC Wood Router I built a few years back. Looking forward to getting back to CNC'ing again! Thanks again Topsie for making this a reality!