Additional instructions 🇬🇧
Hi
I’m building the CNC Heavy and I need help with the bolts and locknuts. Other than the nuts for the V slot I have no idea where the other bolts/locknuts go. Also not sure which bolt and/or locknut size ((M3, M4, M5, or M6) go with any of the 3D printed parts. Are the any instructions out there that I can use? Thanks
I have a plan some where i'l search for it and I come back
Awesome!! Thanks
Hi
Any luck finding the plan?
Hi,
Were you able to find it? Thanks
Hi
Do you have the plans available?
Hi again
I really would to start and complete this built but without knowing which nuts go with which bolt is a bit difficult. Hope you can assist me.
Hi again
I really would to start and complete this built but without knowing which nuts go with which bolt is a bit difficult. Hope you can assist me.
- 12x | M6 x 30mm + écrous + rondelles
- 04x | M6 x 35mm
- 08x | M5 x 50mm
- 20x | M5 x 20 ~ 25mm
- 12x | M5 x 40mm
- 04x | M5 x 80mm
- 100x | M4 x 16mm
- 08x | M4 x 10mm
- 16x | M3 x 15mm
- 100x | Ecrou M4 pour rail aluminium