Bonjour;
Je suis en novice total, et j'ai une petite question pour ma future CNC, j'aimerais savoir faut-il mieux utiliser une transmission par courroie ou passer en moteur en prise direct, je ne sais pas qu'elle est la différence ?.
D'avance merci pour vos réponses
Bonjour fredo,
pour moi la vis, via la démultiplication de son écrou (Ex: T8/2/8 - 1 tour de vis =8mm d'avance de l'écrou) donne plus de couple, de force de traction, donc moteur moins puissant.Pour la courroie, là, il y a d'abord ta poulie de sortie sur l'axe moteur ( donc un diamètre X avec un nombres de dents Y) plus de vitesse, mais oblige d'avoir de moteurs plus costaud.
C'est mon avis, je peux me tromper.
Perso, j'ai réalisé le TopsCNC de Topsie avec une table de travail de = X1020 - Y1120 - Z120 avec des T8/2/8 un paramètre de $110 & 111 = 2000 (dans m config GRBL) je trouve que la vitesse de déplacement est suffisante (pour des bricoleurs du Dimanche...).
Je vais tacher de créer ma propre page Youtube pour y mettre des vidéos de ma réalisation et petite amélioration apporté.
A savoir = pour l'impression des pièces tu peux compter des dizaineeeeees d'heures.....
Des centaines d'heures meme ahah
Je valide ce que dis Eric, les vis permettent d'avoir des moteurs plus petit pour le meme job. Un peut moins de vitesse mais en vérité allé plus vite ne servira a rien vu que la rigidité de la machine ne suivra pas
Effectivement ... Je viens de faire un fichier Excel avec la quantification des impressions via CURA (je le partage sur le forum dans la catégorie Impression 3D) et j'arrive à peu près à 5 kilos de PLA pour un total estimé CURA de 538 heures cumulées donc en réel plus de 600 heures !!! avec un remplissage de 30 % et une vitesse d'impression de 50 mm/S sur ma petite Ender 3... je ne sais pas comment Topsie a fait pour faire çà en une centaine d'heures avec 50% de remplissage ???
tu imprime en 0.2 ou en 0.3 ?