Prix CNC 🇫🇷
Bonjour, ma question est assez simple .j aimerai connaitre le prix de revient d'une CNC comme celle avec les supports orange.
Sachant que pour les supports 3D pas de problème pour les faire.. et qu au final se sera principalement pour utiliser dans de la mousse très dense et bien sur du bois.
Merci d'avance
PS: je suis super novice...lol
@Snorky
En partant de 0 avec du PLA à 20 E le kg, du V slot, de la visserie de qualité et l'électronique, le budget que tu annonces est parfaitement dans les clous, je n'ai pas fait le compte exact mais je pense être au-dessus.
@Snorky
@RVL
I built my Heavy version (1 meter x 1 meter) "all in" for about $750 US- about $683 Euro. I used 4 kg of PLA+ filament.
@TSplain What were your 3D printer settings? A few persons said that they used 5-6 kg.
@TSplain : thanks
@Kohfe
They varied. I used Creality Slicer 1.2.3
The support pieces like the C Arm Supports, dust collection parts I printed layer height at 2.0 and 25% fill.
Same as for the X and Y Axis supports, drag chain supports / mounts.
All of the rigid parts like the Stepper Motor "legs" and gantry / Z Axis parts I printed at 1 layer height and 50% infill
25% of the way a friend of mine showed me how to get good results printing without platform adhesion or supports.
I also did not print the drag chain. I cheated and bought them from amazon.
@TSplain Thank you, I will try that.
My understanding, from scientific test results I have read, is that the number of outside layers is more important for strength than the infil percentage.
@TSplain "25% of the way a friend of mine showed me how to get good results printing without platform adhesion or supports."
What tips did your friend give you?